Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 260 mm x 440 mm x 144 mm ZKL 23152CW33J Double row spherical roller bearings
- 340mm
- 23044-e1-c3-fag
- 240 mm x 360 mm x 118 mm ZKL 24048EW33MH Double row spherical roller bearings
- Cast Iron
- Standard Duty
- 240 mm x 400 mm x 128 mm ZKL 23148EW33MH Double row spherical roller bearings
- Exceptional Bearing
- 6.7719 in
- 240 mm x 360 mm x 92 mm ZKL 23048CW33J Double row spherical roller bearings
- 1.1875 in
- Set Screw Collar
- 240 mm x 400 mm x 128 mm ZKL 23148CW33J Double row spherical roller bearings
- AXK6085
- Needle Roller Thrust
- 240 mm x 400 mm x 128 mm ZKL 23148W33M Double row spherical roller bearings
- 8487900040.US
- Ambient
- 240 mm x 320 mm x 60 mm ZKL 23948EW33MH Double row spherical roller bearings
- Set Screw
- 5.0000 in