Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 220 mm x 340 mm x 90 mm ZKL 23044CW33M Double row spherical roller bearings
- Dry 0.50;Period
- SPB
- 220 mm x 370 mm x 120 mm ZKL 23144EW33MH Double row spherical roller bearings
- SAE 863, FC-2000-K30
- 1 in
- 220 mm x 400 mm x 144 mm ZKL 23244CW33M Double row spherical roller bearings
- 0.5938 in
- Non-Flanged Cup
- 220 mm x 370 mm x 120 mm ZKL 23144CW33J Double row spherical roller bearings
- AISI 52100 Steel - Z
- 1570 kgf
- 320 mm x 480 mm x 121 mm ZKL 23064W33M Double row spherical roller bearings
- Inner Ring Guided
- 240
- 300 mm x 460 mm x 118 mm ZKL 23060EW33MH Double row spherical roller bearings
- Four-Bolt Piloted
- UC211-35C4HR23
- 220 mm x 340 mm x 90 mm ZKL 23044EW33MH Double row spherical roller bearings
- 2 x LOR 112
- 5/8-11 UNC
- 300 mm x 500 mm x 160 mm ZKL 23160CW33J Double row spherical roller bearings
- 7891 lb
- UL, AFBMA, AGMA, ASM