Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 280 mm x 420 mm x 140 mm ZKL 24056EW33MH Double row spherical roller bearings
- AISI 52100 Steel
- 4410 lbf
- 260 mm x 400 mm x 140 mm ZKL 24052EW33MH Double row spherical roller bearings
- Plain Sleeve
- PTFE Lining
- 260 mm x 440 mm x 144 mm ZKL 23152EW33MH Double row spherical roller bearings
- 3.4990 in
- 12000 fpm
- 260 mm x 400 mm x 104 mm ZKL 23052EW33MH Double row spherical roller bearings
- CT-1000-K26, SAE 841
- SCS
- 260 mm x 440 mm x 144 mm ZKL 23152CW33M Double row spherical roller bearings
- Lubrication Fitting
- 5350 kgf
