Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 340 mm x 580 mm x 190 mm ZKL 23168W33M Double row spherical roller bearings
- Separable Inner Ring
- 1.8740 in
- 320 mm x 540 mm x 176 mm ZKL 23164W33M Double row spherical roller bearings
- -35 °F to +
- SAE 841, CT-1000-K26
- 320 mm x 580 mm x 208 mm ZKL 23264W33M Double row spherical roller bearings
- This product can not
- 3000
- 320 mm x 540 mm x 176 mm ZKL 23164EW33MH Double row spherical roller bearings
- Non-Expansion Bearin
- Four-Bolt Flange
- 320 mm x 480 mm x 121 mm ZKL 23064EW33MH Double row spherical roller bearings
- 48600 lbs
- Solid Pillow Block
- 320 mm x 580 mm x 150 mm ZKL 22264W33M Double row spherical roller bearings
- Two-Bolt Base
- 5-7/8" to
- 280 mm x 500 mm x 130 mm ZKL 22256W33M Double row spherical roller bearings
- Dry 0.50;Period
- RoHS
- 320 mm x 480 mm x 160 mm ZKL 24064EW33MH Double row spherical roller bearings
- Contact with Slinger
- Cast Iron