Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 360 mm x 600 mm x 243 mm ZKL 24172EW33MH Double row spherical roller bearings
- Class (3)
- 2.5938 in
- 380 mm x 620 mm x 194 mm ZKL 23176EW33MH Double row spherical roller bearings
- 380 mm x 620 mm x 194 mm
- 360 mm x 600 mm x 192 mm ZKL 23172W33M Double row spherical roller bearings
- 10800 lb
- Non-Expansion Bearin
- 340 mm x 580 mm x 190 mm ZKL 23168EW33MH Double row spherical roller bearings
- 340 mm x 580 mm x 190 mm
- 340 mm x 520 mm x 133 mm ZKL 23068W33M Double row spherical roller bearings
- 5.1800 in
- Powder coat
- 340 mm x 620 mm x 224 mm ZKL 23268W33M Double row spherical roller bearings
- 3-11/16 in
- Cast Iron
- 340 mm x 460 mm x 90 mm ZKL 23968EW33MH Double row spherical roller bearings
- Concentric Collar
- Lubrication Fitting
- 340 mm x 520 mm x 133 mm ZKL 23068EW33MH Double row spherical roller bearings
- Eccentric Collar
- 1780 lbf