Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 180 mm x 380 mm x 126 mm ZKL 22336CW33J Double row spherical roller bearings
- Double-Row Filling S
- 180 mm x 380 mm x 126 mm
- 180 mm x 300 mm x 118 mm ZKL 24136CW33J Double row spherical roller bearings
- Lubrication Groove &
- 2180 rpm
- 180 mm x 320 mm x 86 mm ZKL 22236CW33J Double row spherical roller bearings
- Cast Iron
- 9700 lbf
- 180 mm x 280 mm x 74 mm ZKL 23036W33M Double row spherical roller bearings
- 1.5748 in
- Click here
- 170 mm x 260 mm x 67 mm ZKL 23034W33M Double row spherical roller bearings
- 170 mm x 260 mm x 67 mm
- 170 mm x 360 mm x 120 mm ZKL 22334CW33J Double row spherical roller bearings
- 24060cc/w33-skf
- Standard
- 170 mm x 310 mm x 86 mm ZKL 22234CW33J Double row spherical roller bearings
- Black Oxide
- Spherical Roller