Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 670 mm x 1090 mm x 336 mm ZKL 231/670EW33MH Double row spherical roller bearings
- 5-15/16 in
- 212700 lb
- 630 mm x 1030 mm x 315 mm ZKL 231/630W33M Double row spherical roller bearings
- 087796292833
- ABEC 1
- 530 mm x 780 mm x 185 mm ZKL 230/530W33M Double row spherical roller bearings
- PTFE Lining
- 150 fp/min
- 500 mm x 720 mm x 167 mm ZKL 230/500W33M Double row spherical roller bearings
- 52100/Black Oxi
- Uncoated
- 500 mm x 920 mm x 336 mm ZKL 232/500EW33MH Double row spherical roller bearings
- Non-Expansion Bearin
- Cast Iron
- 500 mm x 830 mm x 264 mm ZKL 231/500W33M Double row spherical roller bearings
- 12 mm
- Maximum of +120
- 480 mm x 790 mm x 248 mm ZKL 23196W33M Double row spherical roller bearings
- Max 250°
- Non-Expansion Bearin