Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 200 mm x 420 mm x 138 mm ZKL 22340W33M Double row spherical roller bearings
- 1.0625 in
- Normal Clearance
- 200 mm x 340 mm x 140 mm ZKL 24140EW33MH Double row spherical roller bearings
- Lubrication Hole
- 38 mm
- 200 mm x 340 mm x 112 mm ZKL 23140EW33MH Double row spherical roller bearings
- Without Snap Ring
- 6 mm
- 200 mm x 360 mm x 128 mm ZKL 23240CW33J Double row spherical roller bearings
- Standard
- Open Type
- 200 mm x 310 mm x 109 mm ZKL 24040CW33J Double row spherical roller bearings
- 4500 fpm
- 29502-4375
- 200 mm x 420 mm x 138 mm ZKL 22340CW33J Double row spherical roller bearings
- 3-3/4 in
- 3-15/16 in