Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 150 mm x 225 mm x 56 mm ZKL 23030CW33J Double row spherical roller bearings
- 0.875 mm
- Plain Sleeve
- 150 mm x 250 mm x 80 mm ZKL 23130W33M Double row spherical roller bearings
- 9-1/8 in
- 5000, 3000
- 140 mm x 225 mm x 85 mm ZKL 24128CW33J Double row spherical roller bearings
- Periodic lubrication
- Periodic lubrication
- 140 mm x 210 mm x 53 mm ZKL 23028EW33MH Double row spherical roller bearings
- 0.02 KGS
- Open Type
- 140 mm x 300 mm x 102 mm ZKL 22328W33M Double row spherical roller bearings
- 4-1/8 in
- Labyrinth
- 140 mm x 225 mm x 68 mm ZKL 23128W33M Double row spherical roller bearings
- .6250 in
- 2.6250 in