Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 180 mm x 250 mm x 52 mm ZKL 23936EW33MH Double row spherical roller bearings
- 3350 lb
- Non-Expansion Bearin
- 180 mm x 300 mm x 96 mm ZKL 23136W33M Double row spherical roller bearings
- 662864718585
- Four-Bolt Flange
- 180 mm x 380 mm x 126 mm ZKL 22336W33M Double row spherical roller bearings
- -22 to 400°F
- 5.8750 in
- 850 mm x 1220 mm x 272 mm ZKL 230/850W33M Double row spherical roller bearings
- Aluminum Bronze
- 5/16-24 in
- 800 mm x 1150 mm x 258 mm ZKL 230/800W33M Double row spherical roller bearings
- 053893554464
- 4.6250 in
- 750 mm x 1360 mm x 475 mm ZKL 232/750CW33F Double row spherical roller bearings
- 7.6300 in
- 6.4400 in
