Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 75 mm x 160 mm x 55 mm ZKL 22315EW33J Double row spherical roller bearings
- Spherical Roller
- 793699700206
- 75 mm x 130 mm x 31 mm ZKL 22215EW33J Double row spherical roller bearings
- Non-Expansion Bearin
- Round
- 70 mm x 150 mm x 51 mm ZKL 22314W33M Double row spherical roller bearings
- 2.8750 in
- Unlubricated
- 75 mm x 160 mm x 55 mm ZKL 22315EMHD2 Double row spherical roller bearings
- Non-Expansion Bearin
- 4030 lbf
- 70 mm x 125 mm x 31 mm ZKL 22214EW33J Double row spherical roller bearings
- 0.6250 in
- Exceptional Bearing
- 70 mm x 150 mm x 51 mm ZKL 22314EW33J Double row spherical roller bearings
- Non-Expansion Bearin
- 1.5625 in
- 70 mm x 150 mm x 51 mm ZKL 22314EW33MH Double row spherical roller bearings
- 240 mm
- 4547359789539
- 65 mm x 140 mm x 48 mm ZKL 22313EMHD2 Double row spherical roller bearings
- Corrosion Resistant
- 7.2500 in
- 65 mm x 140 mm x 48 mm ZKL 22313W33M Double row spherical roller bearings
- 7901 lb
- Lubrication Fitting