Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 110 mm x 200 mm x 69.8 mm ZKL 23222W33M Double row spherical roller bearings
- 703388
- Standard Duty
- 100 mm x 180 mm x 60.3 mm ZKL 23220W33M Double row spherical roller bearings
- SAE 660 (C932&#
- None
- 110 mm x 200 mm x 53 mm ZKL 22222EW33J Double row spherical roller bearings
- Cone & Cup
- Non-Flanged Cup
- 100 mm x 215 mm x 73 mm ZKL 22320EW33J Double row spherical roller bearings
- 55 mm
- PTFE Composite
- 100 mm x 180 mm x 46 mm ZKL 22220W33M Double row spherical roller bearings
- Without Snap Ring
- Round
- 100 mm x 180 mm x 60.3 mm ZKL 23220CW33J Double row spherical roller bearings
- Standard Duty
- 2611 lb
- 100 mm x 180 mm x 46 mm ZKL 22220EW33J Double row spherical roller bearings
- 62mm
- Medium Preload