Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 130 mm x 210 mm x 64 mm ZKL 23126CW33J Double row spherical roller bearings
- With Lubrication Fit
- .9690 in
- 130 mm x 230 mm x 80 mm ZKL 23226W33M Double row spherical roller bearings
- ANSI/ABMA Std.
- 6.2992 in
- 130 mm x 200 mm x 52 mm ZKL 23026W33M Double row spherical roller bearings
- Steel
- Two Rubber Seals
- 120 mm x 260 mm x 86 mm ZKL 22324W33M Double row spherical roller bearings
- RTFE
- Plain Interior
- 120 mm x 180 mm x 46 mm ZKL 23024EW33MH Double row spherical roller bearings
- 3.2500 in
- 0.7500 in
- 120 mm x 260 mm x 86 mm ZKL 22324EW33J Double row spherical roller bearings
- Non-Expansion Bearin
- 2.5000 in
- 120 mm x 200 mm x 62 mm ZKL 23124CW33J Double row spherical roller bearings
- Two-Bolt Flange
- Stainless Steel
- 120 mm x 200 mm x 62 mm ZKL 23124W33M Double row spherical roller bearings
- 1.5000 in
- No Flange
