Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 220 mm x 340 mm x 118 mm ZKL 24044CW33J Double row spherical roller bearings
- 220 mm x 340 mm x 118 mm
- 420 mm x 760 mm x 272 mm ZKL 23284CW33M Double row spherical roller bearings
- 5.9500 in
- Two-Bolt Base
- 400 mm x 720 mm x 256 mm ZKL 23280W33M Double row spherical roller bearings
- Uncoated
- 93125, 93125B
- 420 mm x 700 mm x 224 mm ZKL 23184CW33M Double row spherical roller bearings
- 1.1875 in
- 3.8906 in
- 220 mm x 460 mm x 145 mm ZKL 22344W33M Double row spherical roller bearings
- Exceptional Bearing
- 3.5429 in