ZKL BEARING INDIA PRIVATE LTD.

Double row spherical roller bearings

Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.

Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.

280 mm x 380 mm x 75 mm ZKL 23956EW33MH Double row spherical roller bearings: radial dynamic load capacity: : 4850 lbf; bore type: : Round

280 mm x 420 mm x 140 mm ZKL 24056EW33MH Double row spherical roller bearings: bearing material: : AISI 52100 Steel; radial dynamic load capacity: : 4410 lbf

260 mm x 480 mm x 130 mm ZKL 22252W33M Double row spherical roller bearings: Seals or Shields: : Open Type; Reference Speed Rating (r/min): : 2110

260 mm x 400 mm x 104 mm ZKL 23052CW33J Double row spherical roller bearings: Cage Type: : Plastic; Availability: : In Stock

260 mm x 400 mm x 140 mm ZKL 24052EW33MH Double row spherical roller bearings: sleeve bearing type: : Plain Sleeve; bearing material: : PTFE Lining

260 mm x 440 mm x 144 mm ZKL 23152EW33MH Double row spherical roller bearings: D : 3.4990 in; maximum shaft surface speed: : 12000 fpm

260 mm x 400 mm x 104 mm ZKL 23052EW33MH Double row spherical roller bearings: material specification: : CT-1000-K26, SAE 841; series: : SCS

260 mm x 480 mm x 174 mm ZKL 23252W33M Double row spherical roller bearings: series: : 77SH; maximum pv value: : 1.0 N/mm²

260 mm x 440 mm x 144 mm ZKL 23152CW33M Double row spherical roller bearings: lubrication type: : Lubrication Fitting; radial dynamic load capacity: : 5350 kgf

260 mm x 360 mm x 75 mm ZKL 23952EW33MH Double row spherical roller bearings: Dynamic Load Rating (kN): : 300; Fatigue Load Rating (kN): : 13.5

260 mm x 540 mm x 165 mm ZKL 22352W33M Double row spherical roller bearings: outer ring width: : 243 mm; cage material: : Brass

260 mm x 400 mm x 104 mm ZKL 23052CW33M Double row spherical roller bearings: overall length: : 17 in; travel: : 6 in