Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 400 mm x 650 mm x 200 mm ZKL 23180W33M Double row spherical roller bearings
- -30 to +130 &de
- Right Hand
- 380 mm x 680 mm x 240 mm ZKL 23276W33M Double row spherical roller bearings
- Lock Washer (W4
- 7.9375 in
- 380 mm x 560 mm x 135 mm ZKL 23076W33M Double row spherical roller bearings
- -20 to +120 &de
- Nylon
- 400 mm x 600 mm x 200 mm ZKL 24080EW33MH Double row spherical roller bearings
- 6.1250 in
- 4.7160-12 in
- 380 mm x 560 mm x 135 mm ZKL 23076EW33MH Double row spherical roller bearings
- 662939024466
- 7.9375 in
- 380 mm x 620 mm x 194 mm ZKL 23176W33M Double row spherical roller bearings
- 380 mm x 620 mm x 194 mm
- 360 mm x 600 mm x 192 mm ZKL 23172EW33MH Double row spherical roller bearings
- -22 to 400°F
- Ambient