Double row spherical roller bearings
Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
- 90 mm x 160 mm x 40 mm ZKL 22218EW502MH Double row spherical roller bearings
- Non-Expansion Bearin
- Lubrication Fitting
- 90 mm x 160 mm x 52.4 mm ZKL 23218CW33J Double row spherical roller bearings
- AWIR2
- 90 mm x 160 mm x 52.4 mm
- 85 mm x 180 mm x 60 mm ZKL 22317EMHD2 Double row spherical roller bearings
- 1.0000 in
- 4.8750 in
- 85 mm x 180 mm x 60 mm ZKL 22317EW33J Double row spherical roller bearings
- QVVPH
- Triple-lip contactin
- 80 mm x 170 mm x 58 mm ZKL 22316EMHD2 Double row spherical roller bearings
- AZ52
- 80 mm x 170 mm x 58 mm
- 80 mm x 170 mm x 58 mm ZKL 22316W33M Double row spherical roller bearings
- Standard Duty
- 52100/Black Oxi
- 80 mm x 170 mm x 58 mm ZKL 22316EW33J Double row spherical roller bearings
- Oil-Impregnated Bron
- 1200 (sfm)
- 75 mm x 160 mm x 55 mm ZKL 22315W33M Double row spherical roller bearings
- 3-5/8 in
- Tapered Race