ZKL BEARING INDIA PRIVATE LTD.

Double row spherical roller bearings

Double Row Spherical Roller Bearings 212 products found. Spherical roller bearings feature a self-aligning design for supporting high radial loads and heavy axial loads in both directions. Each bearing consists of an inner ring with two raceways and an outer ring.Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Low friction (Roller end / flange contact area) The open flange design, together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.

Double row deep groove ball bearings (fig. 1) are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.

120 mm x 200 mm x 80 mm ZKL 24124CW33J Double row spherical roller bearings: d : 60mm; Static Load Rating (kN): : 113

110 mm x 180 mm x 56 mm ZKL 23122CW33J Double row spherical roller bearings: radial static load capacity: : 46800 lb; radial dynamic load capacity: : 38200 lb

120 mm x 215 mm x 58 mm ZKL 22224EW33J Double row spherical roller bearings: maximum p value: : Static 8000 / D; manufacturer catalog: : Click here

120 mm x 215 mm x 76 mm ZKL 23224W33M Double row spherical roller bearings: bearing material: : Steel; D : 3.1875 in

120 mm x 180 mm x 46 mm ZKL 23024W33M Double row spherical roller bearings: radial static load capacity: : 37700 lbf; D : 1.6250 in

120 mm x 180 mm x 60 mm ZKL 24024CW33J Double row spherical roller bearings: bore type: : Round; inner ring width: : 2.0313 in

110 mm x 240 mm x 80 mm ZKL 22322W33M Double row spherical roller bearings: compatible bore diameter: : 4-1/8 in; seal material: : Aluminum

110 mm x 200 mm x 53 mm ZKL 22222W33M Double row spherical roller bearings: d1 : 160 mm; Limiting speed : 2200 r/min

110 mm x 180 mm x 56 mm ZKL 23122W33M Double row spherical roller bearings: Clearance: : Standard; Weight: : 28.80 KGS

110 mm x 170 mm x 45 mm ZKL 23022EW33MH Double row spherical roller bearings: thread size: : M85x2; overall length: : 82 mm

110 mm x 170 mm x 45 mm ZKL 23022CW33J Double row spherical roller bearings: finish/coating: : Black Oxide; stud diameter: : 10 mm

110 mm x 180 mm x 69 mm ZKL 24122CW33J Double row spherical roller bearings: series: : FB; flange mounting type: : Four-Bolt Square