Double row self-aligning ball bearings
The inner diameter of the Self-Aligning Double Row Ball Bearings is cylindrical or conical. The conical inner bore has a taper of 1:1 2 or 1:30. In order to enhance the lubrication performance of the bearing, an annular oil groove and three oil holes are machined on the outer ring of the bearing.Bearings Direct's supply of self aligning ball bearings includes self-aligning double row ball bearings. These range from light to medium duty. Our light duty bearings are offered with or without seals.
The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads.. Double-row bearings handle thrust loads in both directions.. Open bearings dissipate heat more efficiently than shielded and sealed bearings.. Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
- 95 mm x 170 mm x 43 mm ZKL 2219 Double row self-aligning ball bearings
- BEARINGS LIMITED
- BEARINGS LIMITED
- 90 mm x 190 mm x 64 mm ZKL 2318 Double row self-aligning ball bearings
- BEARINGS LIMITED
- B00308
- 90 mm x 160 mm x 30 mm ZKL 1218 Double row self-aligning ball bearings
- 0029176576423
- 4.45
- 80 mm x 140 mm x 26 mm ZKL 1216 Double row self-aligning ball bearings
- Mounted Units &
- N/A
- 75 mm x 160 mm x 37 mm ZKL 1315 Double row self-aligning ball bearings
- 0808250412518
- N/A
- 75 mm x 130 mm x 31 mm ZKL 2215 Double row self-aligning ball bearings
- GARLOCK BEARINGS GGB
- 0.0