| No. | Brand | L | K | T | h | E | F | b | a |
| PLC 58-6 | ZKL | - | - | - | - | - | - | - | - |
| PLC 59-7 | ZKL | - | - | - | - | mm | 154 mm | mm | - |
| 511Z35 | ZKL | - | - | - | - | - | - | - | - |
| 22220 | SKF | - | 2 mm | - | - | - | - | - | - |
| PLC 03-33 | ZKL | - | 9 mm | - | - | - | - | 16.7 mm | - |
| PLC 511-14 | ZKL | 511.175 mm | - | - | - | - | - | - | - |
| PLC 58-11 | ZKL | - | - | 560 mm | - | - | - | - | - |
| PLC 24-4 | ZKL | - | - | - | - | - | - | - | - |
| PLC 23-7 | ZKL | - | 2 mm | - | - | - | - | - | - |
| PLC 912-85 | ZKL | - | - | - | - | - | - | - | - |
| T-49768 | ZKL | - | - | - | - | - | - | - | - |
| PLC 24-5 | ZKL | 304.8 mm | - | - | - | - | - | - | - |
| PLC 14-28 | ZKL | - | - | - | - | - | - | - | - |
| PLC 412-12 | ZKL | - | - | - | - | - | 55 mm | 5 mm | - |
| PLC 24-2 | ZKL | - | - | - | - | - | - | - | - |
| PLC 59-10 | ZKL | 558.8 mm | - | - | - | - | - | - | - |
| PLC 03-79 | ZKL | - | - | - | - | - | - | - | - |
| PLC 510-20 | ZKL | - | - | - | - | - | - | - | - |
| PLC 77-1 | ZKL | - | - | - | - | - | - | 13.9 mm | - |
| PLC 912-86 | ZKL | - | - | - | - | - | - | - | - |
| ZKL PLC 412-12 Special bearings | rs (min):1.1 mm; F:55 mm; b:5 mm; Dynamic (Ca):61.9 kN; d2:45 mm; B:19 mm; s:1.4 mm; b1:8.5 mm; r1s (min):1.1 mm; Pu:7.400 kN; |
| ZKL PLC 58-12 Special bearings | l4 max.:174 mm; l7 min.:40 mm; G:M 36x3; Mass rod end:1.4 kg; h1:130 mm; α:6 °; Specific dynamic load factor K:150 N/mm²; B:25 mm; r1 min.:0.6 mm; w:41 mm; |
| ZKL PLC 58-9-1 Special bearings | d:25.000 mm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30700 N; Accessories:Two Seals; B:25.40 mm; Sealed Speed Rating n3:7500 rpm; Basic Static Radial Load Rating Co:20400 N; Grease Speed Rating n1:7500 rpm; |
| ZKL PLC 59-7 Special bearings | b:mm; Static (Coa):981 kN; D:260 mm; rs (min):3 mm; F:154 mm; E:mm; d2:120 mm; Pu:98.680 kN; s:6.4 mm; r1s (min):3 mm; |
| 30 mm x 49.2 mm x 12 mm ZKL PLC 23-4 Special bearings | h:50.8 mm; Initial grease fill:623.7 g; P150°:136 kN; J min.:431.8 mm; L:539.75 mm; Ca:82.804 mm; Labyrinth ring:2 x LOR 126; Appropriate attachment bolt size G:1 in; Cap bolt recommended tightening torque:813.5 N·m; J max.:463.55 mm; Size (mm):30 mm x 49.2 mm x 12 mm ; |
| ZKL PLC 510-20 Special bearings | B:2.5 mm; M:194 mm; d:200 mm; f:20 mm; d1:222 mm; d2:245 mm; Mass lock washer:0.22 kg; |
| ZKL PLC 59-10 Special bearings | L:558.8 mm; Da:289.999 mm; Taconite seal:TER 130; S:4.763 mm; P120°:85.9 kN; End plug (suffix Y):EPR 16; Pa:38.5 kN; P180°:94.3 kN; Adapter sleeve assembly:SNW 32x5.7/16; H:336.55 mm; |
| ZKL PLC 510-23 Special bearings | Ca min.:3.5 mm; B2:30 mm; Limiting speed:1800 r/min; Da max.:353 mm; Ba min.:10 mm; D:370 mm; Fatigue load limit Pu:245 kN; D1 ≈:333 mm; da max.:290 mm; r1,2 min.:4 mm; |
| ZKL PLC 010-3 Special bearings | D:225.0000 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:2100 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Accessories:Snap-Ring; B:54.00 mm; Basic Static Radial Load Rating Co:150000 N; |
| SKF 22220 Bearing | Calculation factor Y0:1.6; Db min.:105 mm; K:2 mm; Reference speed:3800 r/min; Basic static load rating C0:305 kN; d:70 mm; Calculation factor Y1:1.6; ra max.:1.5 mm; Calculation factor Y2:2.3; Basic dynamic load rating C:214 kN; Size (mm):17 mm x 35 mm x 12.3 mm; |
| 35 mm x 53.6 mm x 15.5 mm ZKL PLC 24-2 Special bearings | Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:3200 rpm; B:41.30 mm; D:130.0000 mm; Oil Speed Rating n2:4300 rpm; d:75.000 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:88000 N; Size (mm):35 mm x 53.6 mm x 15.5 mm ; |
| 55.2 mm x 78 mm x 11.6 mm ZKL PLC 25-6 Special bearings | Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; B:8 mm; D:12 mm; Permissible sliding velocity v max.:0.5 m/s; d:7 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; Size (mm):55.2 mm x 78 mm x 11.6 mm ; |
17 mm x 35 mm x 12.3 mm ZKL PLC 23-7 Special bearings Video
Ložisko ZKL PLC 23-7 |
Ložisko ZKL PLC 23-7. Ložiska PLC. 71,90 Kč. 87,00 Kč s DPH (21 %). Autorizovaný prodejce ZKL. Autorizovaný prodejce. garantujeme originál. Není skladem ...
ZKL katalog ANGL.indb - World Bearing
The main ZKL rolling-contact bearing catalogue presents an overview of standard and special rolling- ... PLC 24-4; PLC 24-5; PLC 24-6; PLC 23-7 .646 pages
zkl bearings plc 23-8-1 - BDI
ZKL BEARINGS. Manufacturer Name. ZVL-ZKL BEARINGS CORP. Minimum Buy Quantity. N/A. Weight / Kilogram. 0. Product Group - BDI. B00308. UNSPSC. 31171504 ...
ZKL Bearing PLC 23-7 - Spareazone
ZKL Bearing PLC 23-7. (0 customer reviews) 0 sold. Price On Request! Ask a Question. Category: Bearings · ZKL. Brand; Reviews (0); More Offers ...
Bearings
Published on ZKL Group (http://www.zkl.cz) ... ball bearings 511Z30; PLC 23-4; PLC 23-5; 511Z35; PLC 24-2; PLC 24-4; PLC 24-5; PLC 24-6; PLC 23-7 [33].5 pages
PLC 23-7 (ZKL) - Golyós csapágy - Bearings kft
PLC 23-7 (ZKL) a Golyós csapágy kategóriában.
ZKL PLC 23-7 ložisko |
Výrobce: ZKL; Kód artiklu: 381222; Katalogové číslo: L.PLC 23-7; Množství skladem: 33 ks; Skladem u dodavatele: 250 ks - do 10 pracovních dnů ...
PLC23 2
ZKL. bearing. PLC 23-5*ZKL. Found in interchange catalogue - click here to view bearing. 30X49.25X13.6. 0 pcs. Érd. 5.85 €. 5.85 €. PLC 23-7*ZVL.