| No. | Brand | L | K | T | h | E | F | b | a |
| PLC 59-7 | ZKL | - | - | - | - | mm | 154 mm | mm | - |
| PLC 58-11 | ZKL | - | - | 560 mm | - | - | - | - | - |
| PLC 23-4 | ZKL | 539.75 mm | - | - | 50.8 mm | - | - | - | - |
| PLC 510-23 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-9-1 | ZKL | - | - | - | - | - | - | - | - |
| PLC 14-29 | ZKL | - | - | - | - | - | - | - | - |
| PLC 24-4 | ZKL | - | - | - | - | - | - | - | - |
| PLC 912-85 | ZKL | - | - | - | - | - | - | - | - |
| 511Z30 | ZKL | - | - | - | - | - | - | - | - |
| PLC 510-20 | ZKL | - | - | - | - | - | - | - | - |
| PLC 010-3 | ZKL | - | - | - | - | - | - | - | - |
| PLC 511-14 | ZKL | 511.175 mm | - | - | - | - | - | - | - |
| PLC 03-33 | ZKL | - | 9 mm | - | - | - | - | 16.7 mm | - |
| PLC 412-12 | ZKL | - | - | - | - | - | 55 mm | 5 mm | - |
| 22220 | SKF | - | 2 mm | - | - | - | - | - | - |
| PLC 03-79 | ZKL | - | - | - | - | - | - | - | - |
| PLC 03-29 | ZKL | - | - | - | - | - | - | - | 38.342 mm |
| PLC 14-28 | ZKL | - | - | - | - | - | - | - | - |
| KL 761 | ZKL | 139.7 mm | - | - | - | - | - | - | 2.381 mm |
| T-49768 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-2 | ZKL | - | 12 mm | - | - | - | - | - | - |
| PLC 24-5 | ZKL | 304.8 mm | - | - | - | - | - | - | - |
| PLC 24-2 | ZKL | - | - | - | - | - | - | - | - |
| PLC 59-5 | ZKL | - | - | - | 27.781 mm | - | - | - | - |
| PLC 23-7 | ZKL | - | 2 mm | - | - | - | - | - | - |
| PLC 23-5 | ZKL | - | - | - | - | - | - | - | - |
| PLC 25-6 | ZKL | - | - | - | - | - | - | - | - |
| ZKL PLC 511-14 Special bearings | Housing:SAF 528; R1:87.313 mm; Pa:28.5 kN; Cap bolt recommended tightening torque:400 N·m; Mass pillow block:68 kg; H1:152.4 mm; L:511.175 mm; Cap bolt:2 x 1-8 UNC; J1:85.725 mm; P90°:149 kN; |
| ZKL PLC 59-10 Special bearings | L:558.8 mm; Da:289.999 mm; Taconite seal:TER 130; S:4.763 mm; P120°:85.9 kN; End plug (suffix Y):EPR 16; Pa:38.5 kN; P180°:94.3 kN; Adapter sleeve assembly:SNW 32x5.7/16; H:336.55 mm; |
| 40.1 mm x 59.9 mm x 10.8 mm ZKL PLC 24-5 Special bearings | s:32.941 mm; H2:47.625 mm; H:160.338 mm; Limiting speed:2800 r/min; da:74.612 mm; Basic dynamic load rating C:212 kN; L:304.8 mm; B:65.484 mm; J min.:234.95 mm; Mass bearing unit:10.9 kg; Size (mm):40.1 mm x 59.9 mm x 10.8 mm ; |
| 30 mm x 49.2 mm x 13.6 mm ZKL PLC 23-5 Special bearings | Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:2.65 kg; A:54 mm; d:50 mm; J7:19 mm; Recommended diameter for attachment bolts, inch G:0.625 in; B1:46 mm; J min.:149 mm; A5:29.5 mm; s1:27.5 mm; Size (mm):30 mm x 49.2 mm x 13.6 mm ; |
| ZKL PLC 58-6 Special bearings | Oil Speed Rating n2:4800 rpm; Basic Static Radial Load Rating Co:106000 N; Fillet Radius ra:1.50 mm; Accessories:One Seal; Grease Speed Rating n1:3600 rpm; d:65.000 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:88000 N; B:38.10 mm; Sealed Speed Rating n3:3600 rpm; |
| 22.2 mm x 36.9 mm x 16.5 mm ZKL PLC 03-33 Special bearings | Mass bearing:236 kg; Basic dynamic load rating C:5280 kN; Design variant/feature:BC4.7/W33WI; Calculation factor kr:630; b:16.7 mm; D1 ≈:452.8 mm; K:9 mm; D:500 mm; r3,4 min.:5 mm; d:350 mm; Size (mm):22.2 mm x 36.9 mm x 16.5 mm ; |
| 10.4 mm x 35 mm x 10 mm ZKL PLC 03-79 Special bearings | Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2800 rpm; Basic Dynamic Radial Load Rating C:172000 N; Fillet Radius ra:2.00 mm; d:70.000 mm; Accessories:One Seal & Snap-Ring; D:150.0000 mm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:186000 N; B:63.50 mm; Size (mm):10.4 mm x 35 mm x 10 mm ; |
| 30 mm x 49.2 mm x 12 mm ZKL 511Z30 Special bearings | d:400.000 mm; Basic Dynamic Radial Load Rating C:345000 N; Fillet Radius ra:4.00 mm; B:65.00 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:1200 rpm; Sealed Speed Rating n3:600 rpm; Basic Static Radial Load Rating Co:560000 N; Grease Speed Rating Open/Shielded n1:950 rpm; D:540.0000 mm; Size (mm):30 mm x 49.2 mm x 12 mm ; |
| ZKL PLC 412-12 Special bearings | rs (min):1.1 mm; F:55 mm; b:5 mm; Dynamic (Ca):61.9 kN; d2:45 mm; B:19 mm; s:1.4 mm; b1:8.5 mm; r1s (min):1.1 mm; Pu:7.400 kN; |
| ZKL KL 761 Special bearings | S:0.794 mm; s:25.4 mm; d2:73.819 mm; A6:19.05 mm; Limiting speed:4100 r/min; a:2.381 mm; Attachment bolt diameter G:12.7 mm; A1:75.406 mm; N1:14.287 mm; L:139.7 mm; |
| ZKL PLC 510-23 Special bearings | Ca min.:3.5 mm; B2:30 mm; Limiting speed:1800 r/min; Da max.:353 mm; Ba min.:10 mm; D:370 mm; Fatigue load limit Pu:245 kN; D1 ≈:333 mm; da max.:290 mm; r1,2 min.:4 mm; |
| ZKL PLC 510-9 Special bearings | d:1.375 in; Fillet Radius ra:0.04 in; Grease Speed Rating n1:11000 rpm; Fillet Radius rb:0.024 in; Oil Speed Rating n2:40000 rpm; Basic Dynamic Radial Load Rating C:22500 N; Basic Static Radial Load Rating Co:15600 N; D:2.5625 in; B:0.5625 in; |
30 mm x 49.2 mm x 12 mm ZKL PLC 23-4 Special bearings Video
PLC23 2
PLC 23-4*ZVL. Found in interchange catalogue - click here to view bearing. 30X49.25X12.2. 3 pcs. Érd. 4.69 €. 4.69 €. PLC 23-5*ZKL. ECONOMICAL BRAND. ZKL.
ROLLING BEARINGS
Publication Rolling Bearings ZKL shows a survey of standardized rolling bearings ... PLC 23-4. PLC 23-5. PLC 24-2. PLC 23-7. PLC 24-4. PLC 24-5. PLC 24-6 ...239 pages
ZKL PLC 23-4 ložisko |
ZKL PLC 23-4 ložisko ; Materiál, ocel ; Profil díry, válcová ; Průměr d (mm), 30 ; Průměr D (mm), 49,2 ; Šířka B (mm), 12.Katalogové číslo: L.PLC 23-4Skladem u dodavatele: 58 ks - do 10 pracovních ...Materiál: ocel
Ložisko PLC 23-4 ZKL | Ložiska Polička
Created by Shoptet Copyright 2022 Ložiska Polička. All rights reserved. According to law, the seller is obliged to issue receipt to the buyer and also register ...
ZKL katalog ANGL.indb - World Bearing
The main ZKL rolling-contact bearing catalogue presents an overview of ... Special thrust ball bearings 511Z30; PLC 23-4; PLC 23-5; 511Z35; PLC 24-2;.646 pages
Ložisko PLC 23-4, ZKL - EVROX
Ložisko PLC 23-4 30x49,25x12 mm ZKL. ... Výrobca: ZKL. naša cena bez DPH : 6,30 €. naša cena s DPH (20 %): 7,56 €. do košíka:.
ZKL Ložisko PLC 23-4 Ložisko |
Výrobce. ZKL ; Kód zboží. PLC 23-4 ; Dokumenty (1) ; Potřebujete poradit? · Zdeněk Sedmík. Zákaznická linka. 569 427 754. (Po–Pá, 7:00–16:00). [email protected].
PLC 23-4 - ZKL BEARINGS | Thrust Ball Bearing | BDI Slovakia
Bearing; Ball Thrust; 30MM Bore 1; 30MM Bore 2; 49.2MM Outside Diameter; 12MM Height; Single Direction; Not Banded; ABEC 1 | ISO P0 Precision.