| No. | Brand | L | K | T | h | E | F | b | a |
| PLC 510-23 | ZKL | - | - | - | - | - | - | - | - |
| PLC 412-12 | ZKL | - | - | - | - | - | 55 mm | 5 mm | - |
| 511Z35 | ZKL | - | - | - | - | - | - | - | - |
| PLC 23-4 | ZKL | 539.75 mm | - | - | 50.8 mm | - | - | - | - |
| PLC 912-85 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-12 | ZKL | - | - | - | - | - | - | - | - |
| PLC 24-4 | ZKL | - | - | - | - | - | - | - | - |
| PLC 512-5 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-9-1 | ZKL | - | - | - | - | - | - | - | - |
| PLC 77-1 | ZKL | - | - | - | - | - | - | 13.9 mm | - |
| 22220 | SKF | - | 2 mm | - | - | - | - | - | - |
| PLC 25-6 | ZKL | - | - | - | - | - | - | - | - |
| PLC 03-29 | ZKL | - | - | - | - | - | - | - | 38.342 mm |
| PLC 59-5 | ZKL | - | - | - | 27.781 mm | - | - | - | - |
| PLC 14-29 | ZKL | - | - | - | - | - | - | - | - |
| PLC 510-9 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-6 | ZKL | - | - | - | - | - | - | - | - |
| PLC 03-79 | ZKL | - | - | - | - | - | - | - | - |
| PLC 14-28 | ZKL | - | - | - | - | - | - | - | - |
| PLC 59-7 | ZKL | - | - | - | - | mm | 154 mm | mm | - |
| PLC 24-2 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-2 | ZKL | - | 12 mm | - | - | - | - | - | - |
| PLC 010-3 | ZKL | - | - | - | - | - | - | - | - |
| KL 761 | ZKL | 139.7 mm | - | - | - | - | - | - | 2.381 mm |
| PLC 23-5 | ZKL | - | - | - | - | - | - | - | - |
| PLC 23-7 | ZKL | - | 2 mm | - | - | - | - | - | - |
| PLC 58-11 | ZKL | - | - | 560 mm | - | - | - | - | - |
| ZKL PLC 511-14 Special bearings | Housing:SAF 528; R1:87.313 mm; Pa:28.5 kN; Cap bolt recommended tightening torque:400 N·m; Mass pillow block:68 kg; H1:152.4 mm; L:511.175 mm; Cap bolt:2 x 1-8 UNC; J1:85.725 mm; P90°:149 kN; |
| ZKL PLC 58-2 Special bearings | Reference speed:430 r/min; D1 ≈:969 mm; Da max.:1056 mm; r1,2 min.:7.5 mm; K:12 mm; da min.:704 mm; Basic dynamic load rating C:12100 kN; rb max.:6 mm; Calculation factor kr:0.32; D:1090 mm; |
| 30 mm x 49.2 mm x 13.6 mm ZKL PLC 23-5 Special bearings | Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:2.65 kg; A:54 mm; d:50 mm; J7:19 mm; Recommended diameter for attachment bolts, inch G:0.625 in; B1:46 mm; J min.:149 mm; A5:29.5 mm; s1:27.5 mm; Size (mm):30 mm x 49.2 mm x 13.6 mm ; |
| 30 mm x 49.2 mm x 12 mm ZKL PLC 23-4 Special bearings | h:50.8 mm; Initial grease fill:623.7 g; P150°:136 kN; J min.:431.8 mm; L:539.75 mm; Ca:82.804 mm; Labyrinth ring:2 x LOR 126; Appropriate attachment bolt size G:1 in; Cap bolt recommended tightening torque:813.5 N·m; J max.:463.55 mm; Size (mm):30 mm x 49.2 mm x 12 mm ; |
| ZKL PLC 912-85 Special bearings | Oil Speed Rating n2:6500 rpm; Grease Speed Rating n1:5000 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:35500 N; d:70.000 mm; Fillet Radius ra:1.00 mm; B:20.00 mm; Basic Dynamic Radial Load Rating C:34500 N; |
| ZKL PLC 912-86 Special bearings | Sealed Speed Rating n3:10000 rpm; Basic Static Radial Load Rating Co:6550 N; Accessories:Without Accessories; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:18000 rpm; Basic Dynamic Radial Load Rating C:12700 N; B:14.00 mm; Grease Speed Rating Open/Shielded n1:15000 rpm; Grease Speed Rating n1:15000 rpm; Oil Speed Rating Open/Shielded n2:18000 rpm; |
| 55.2 mm x 78 mm x 11.6 mm ZKL PLC 25-6 Special bearings | Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; B:8 mm; D:12 mm; Permissible sliding velocity v max.:0.5 m/s; d:7 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; Size (mm):55.2 mm x 78 mm x 11.6 mm ; |
| 36 mm x 62 mm x 16 mm ZKL PLC 14-29 Special bearings | P150°:25.4 kN; Da:130 mm; Max. speed for PosiTrac Plus seal:2350 r/min; H:157.559 mm; da:60.325 mm; Mass pillow block:13.1 kg; H2:28.575 mm; Cap bolt recommended tightening torque:81.3 N·m; R2:21.431 mm; Cap bolt:2 x 1/2-13 UNC; Size (mm):36 mm x 62 mm x 16 mm ; |
| 40.1 mm x 59.9 mm x 10.8 mm ZKL PLC 24-5 Special bearings | s:32.941 mm; H2:47.625 mm; H:160.338 mm; Limiting speed:2800 r/min; da:74.612 mm; Basic dynamic load rating C:212 kN; L:304.8 mm; B:65.484 mm; J min.:234.95 mm; Mass bearing unit:10.9 kg; Size (mm):40.1 mm x 59.9 mm x 10.8 mm ; |
| ZKL PLC 58-12 Special bearings | l4 max.:174 mm; l7 min.:40 mm; G:M 36x3; Mass rod end:1.4 kg; h1:130 mm; α:6 °; Specific dynamic load factor K:150 N/mm²; B:25 mm; r1 min.:0.6 mm; w:41 mm; |
| 17 mm x 35 mm x 12.3 mm ZKL PLC 23-7 Special bearings | Calculation factor Y0:1.6; Db min.:105 mm; K:2 mm; Reference speed:3800 r/min; Basic static load rating C0:305 kN; d:70 mm; Calculation factor Y1:1.6; ra max.:1.5 mm; Calculation factor Y2:2.3; Basic dynamic load rating C:214 kN; Size (mm):17 mm x 35 mm x 12.3 mm ; |
| ZKL PLC 58-11 Special bearings | Comparative radial load rating CF:4500 kN; Thrust factor K:1.84; Calculation factor Y2:3.3; Calculation factor Y0:2.2; T:560 mm; D1 ≈:916 mm; r1,2 min.:15 mm; Comparative axial load rating CFa:701 kN; Calculation factor e:0.31; Design variant/feature:TQON/GW; |
ZKL PLC 58-6 Special bearings Video
ZKL katalog ANGL.indb - World Bearing
The main ZKL rolling-contact bearing catalogue presents an overview of standard and ... Double row spherical roller bearings PLC 58-6; PLC 59-5; PLC 512-5 .646 pages
Подшипник ZKL PLC 58-6 - Автопромподшипник
Подшипник ZKL PLC 58-6 - заказать подшипники и сальники в интернет-магазине Автопромподшипник +38 (063) 233-03-26, а также автозапчасти и смазки для ...
Bearings
Published on ZKL Group (http://www.zkl.cz). Bearings. Single row ball bearings ... Double row spherical roller bearing PLC 58-6; PLC 59-5; PLC 512-5 [40].5 pages
ZKL Bearing PLC 58-6 – Spareazone
Add to wishlist. Product share: ZKL Bearing PLC 58-6. (0 customer reviews) 0 sold. Price On Request! Ask a Question. Category: Bearings.
ROLLING BEARINGS
Publication Rolling Bearings ZKL shows a survey of standardized rolling bearings and ... PLC 58-6. PLC 59-5. PLC 512-5, PLC 412-7, PLC 412-8.239 pages
Купить подшипник plc 58-6 zkl в Украине, цена на ...
Цена на подшипник plc 58-6 zkl, лучшее качество, огромный каталог товаров ☑ Доставка по Украине.
PLC 58-6 | ZKL Group
Hlavní rozměry, Základní únosnost, Mezní únavové zatížení, Mezní frekvence otáčení pro mazání, Označení ložiska, Hmotnost.
Table of Contents - Emiliana cuscinetti
In no event shall ZVL-ZKL Bearings Corporation be liable for loss of use or for any ... The PLC 58-6 has a polyamide cage, which allows the bearing to be ...212 pages