| No. | Brand | L | K | T | h | E | F | b | a |
| PLC 24-4 | ZKL | - | - | - | - | - | - | - | - |
| PLC 511-14 | ZKL | 511.175 mm | - | - | - | - | - | - | - |
| PLC 59-7 | ZKL | - | - | - | - | mm | 154 mm | mm | - |
| 511Z30 | ZKL | - | - | - | - | - | - | - | - |
| PLC 03-29 | ZKL | - | - | - | - | - | - | - | 38.342 mm |
| PLC 512-5 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-11 | ZKL | - | - | 560 mm | - | - | - | - | - |
| PLC 912-86 | ZKL | - | - | - | - | - | - | - | - |
| PLC 59-5 | ZKL | - | - | - | 27.781 mm | - | - | - | - |
| PLC 510-23 | ZKL | - | - | - | - | - | - | - | - |
| PLC 03-79 | ZKL | - | - | - | - | - | - | - | - |
| PLC 24-2 | ZKL | - | - | - | - | - | - | - | - |
| PLC 23-5 | ZKL | - | - | - | - | - | - | - | - |
| PLC 77-1 | ZKL | - | - | - | - | - | - | 13.9 mm | - |
| PLC 412-12 | ZKL | - | - | - | - | - | 55 mm | 5 mm | - |
| T-49768 | ZKL | - | - | - | - | - | - | - | - |
| PLC 03-33 | ZKL | - | 9 mm | - | - | - | - | 16.7 mm | - |
| 511Z35 | ZKL | - | - | - | - | - | - | - | - |
| PLC 14-28 | ZKL | - | - | - | - | - | - | - | - |
| PLC 510-20 | ZKL | - | - | - | - | - | - | - | - |
| PLC 23-7 | ZKL | - | 2 mm | - | - | - | - | - | - |
| PLC 010-3 | ZKL | - | - | - | - | - | - | - | - |
| PLC 58-6 | ZKL | - | - | - | - | - | - | - | - |
| ZKL PLC 412-12 Special bearings | rs (min):1.1 mm; F:55 mm; b:5 mm; Dynamic (Ca):61.9 kN; d2:45 mm; B:19 mm; s:1.4 mm; b1:8.5 mm; r1s (min):1.1 mm; Pu:7.400 kN; |
| ZKL PLC 59-7 Special bearings | b:mm; Static (Coa):981 kN; D:260 mm; rs (min):3 mm; F:154 mm; E:mm; d2:120 mm; Pu:98.680 kN; s:6.4 mm; r1s (min):3 mm; |
| 340 mm x 640 mm x 140 mm ZKL T-49768 Special bearings | Basic dynamic load rating C:980 kN; D:280 mm; Reference speed:2400 r/min; Mass bearing:27 kg; Ca min.:-7.5 mm; r1,2 min.:4 mm; Operating clearance factor k2:0.122; Da max.:263 mm; s1 max.:31.2 mm; D1 ≈:234 mm; Size (mm):340 mm x 640 mm x 140 mm ; |
| ZKL PLC 59-5 Special bearings | ba:26.194 mm; h:27.781 mm; Da:90 mm; H2:23.813 mm; P180°:12.5 kN; Cap bolt, SAE grade:5; S:3.572 mm; Cap bolt:2 x 7/16-14 UNC; P90°:17.3 kN; P120°:11.1 kN; |
| ZKL PLC 010-3 Special bearings | D:225.0000 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:2100 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Accessories:Snap-Ring; B:54.00 mm; Basic Static Radial Load Rating Co:150000 N; |
| SKF 22220 Bearing | Calculation factor Y0:1.6; Db min.:105 mm; K:2 mm; Reference speed:3800 r/min; Basic static load rating C0:305 kN; d:70 mm; Calculation factor Y1:1.6; ra max.:1.5 mm; Calculation factor Y2:2.3; Basic dynamic load rating C:214 kN; Size (mm):17 mm x 35 mm x 12.3 mm; |
| 30 mm x 49.2 mm x 13.6 mm ZKL PLC 23-5 Special bearings | Recommended tightening torque for grub screw:7.4 N·m; Mass bearing unit:2.65 kg; A:54 mm; d:50 mm; J7:19 mm; Recommended diameter for attachment bolts, inch G:0.625 in; B1:46 mm; J min.:149 mm; A5:29.5 mm; s1:27.5 mm; Size (mm):30 mm x 49.2 mm x 13.6 mm ; |
| 25 mm x 52 mm x 37 mm ZKL PLC 14-28 Special bearings | Accessories:Shield & Seal; D:42.0000 mm; Oil Speed Rating n2:20000 rpm; Sealed Speed Rating n3:12000 rpm; Basic Static Radial Load Rating Co:5400 N; Grease Speed Rating Open/Shielded n1:17000 rpm; d:15.000 mm; Fillet Radius ra:1.00 mm; B:13.00 mm; Basic Dynamic Radial Load Rating C:11400 N; Size (mm):25 mm x 52 mm x 37 mm ; |
| 30 mm x 49.2 mm x 12 mm ZKL 511Z30 Special bearings | d:400.000 mm; Basic Dynamic Radial Load Rating C:345000 N; Fillet Radius ra:4.00 mm; B:65.00 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:1200 rpm; Sealed Speed Rating n3:600 rpm; Basic Static Radial Load Rating Co:560000 N; Grease Speed Rating Open/Shielded n1:950 rpm; D:540.0000 mm; Size (mm):30 mm x 49.2 mm x 12 mm ; |
| ZKL PLC 511-14 Special bearings | Housing:SAF 528; R1:87.313 mm; Pa:28.5 kN; Cap bolt recommended tightening torque:400 N·m; Mass pillow block:68 kg; H1:152.4 mm; L:511.175 mm; Cap bolt:2 x 1-8 UNC; J1:85.725 mm; P90°:149 kN; |
| ZKL PLC 510-20 Special bearings | B:2.5 mm; M:194 mm; d:200 mm; f:20 mm; d1:222 mm; d2:245 mm; Mass lock washer:0.22 kg; |
| ZKL PLC 512-5 Special bearings | Basic Dynamic Radial Load Rating C:1010000 N; Fillet Radius ra:4.00 mm; Fillet Radius rb:1.50 mm; Grease Speed Rating n1:880 rpm; B:160.00 mm; d:260.000 mm; Basic Static Radial Load Rating Co:2040000 N; Oil Speed Rating n2:1100 rpm; D:480.0000 mm; |
ZKL KL 761 Special bearings Video
Bearings
Published on ZKL Group (http://www.zkl.cz). Bearings ... Double row spherical roller bearing PLC 58-2, Single row ball bearing KL 761 [39].5 pages
Table of Contents - Emiliana cuscinetti
ZVL-ZKL Bearings. Corporation's sole obligation shall be limited to making available to Buyer any existing applicable warranty of the manufacturer or supplier ...212 pages
Special bearings | ZKL Group
KL 761, 559, 761, 38.2, 232, 425, Show detail and calculations · PLC 58-2, 65, 158.8, 70, 212, 250, Show detail and calculations.
Buy ZKL KL 761 Special Bearings - NACHI DRIVESHAFT,INC.
Model Number: KL 761 ; Brand: AMI BEARINGS ; Length Thru Bore: 1.689 Inch | 42.901 ; Keyword String: Hanger ; Mounting Thread: 5/8 Straight Pipe Fe.
Double row spherical roller bearing PLC 58-2, Single ... - ZKL
Double row spherical roller bearing PLC 58-2, Single row ball bearing KL 761. Bearing designation. d. Is less than, Is less than or equal to, Is equal to ...
KL 761
KL 761. Published on ZKL Group (http://www.zkl.cz). KL 761. Rodamientos especiales. KL 761. Dimensiones. Capacidad de carga elemental. Limite de.
ZKL katalog ANGL.indb - World Bearing
specify the basic parameters of the entire range of ZKL bearings. Information related to specific types of ... Single row ball bearing KL 761 .646 pages
ROLLING BEARINGS
Publication Rolling Bearings ZKL shows a survey of standardized rolling bearings and ... KL 761. 1). 1) Single row ball bearing for peeling machines in ...239 pages