| 71905ACD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | B:30.5 mm; F:20 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.021 kg; d:17 mm; |
| 71911CD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | d:40 mm; db (min):48.5 mm; D:90 mm; Da (max):81.5 mm; Limiting Speed - Oil:7,800 rpm; Radial Clearance:0.045 to 0.070 mm; db (max):51 mm; dc (min):55 mm; ra1 (max):1.5 mm; ra (max):1.5 mm; r1:1.5 mm; Static Load Rating:88,000 N; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.5 mm; Dynamic Load Rating:82,500 N; B:33 mm; Inside Ring Outside Diameter:53.5 mm; Enclosure:Open; Configuration:Single Row; |
| 71912ACD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | d:17 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:9,550 N; Static Load Rating:4,800 N; Radial Clearance:0.011 to 0.025 mm; ra (max):0.6 mm; Factor fo:13.1; Da (max):35 mm; Limiting Speed - Grease:12,000 rpm; Fillet Radius/Chamfer:0.6 mm; D:40 mm; Configuration:Single Row; Weight:0.065 kg; Enclosure:Double Seal; B:12 mm; da (min):22 mm; |
| 71915ACDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | Center Guidance:Fixed Inner Ring Rib; Enclosure:Open; ra (max):5 mm; Hole Diameter (do):15 mm; Dynamic Load Rating:7,000,000 N; Fillet Radius/Chamfer:6 mm; Limiting Speed - Oil:640 rpm; Static Load Rating:10,800,000 N; B:195 mm; Limiting Speed - Grease:510 rpm; Axial Load Factor Y0:2.89; Configuration:Double Row; Roller Profile:Symmetric; Axial Load Factor Y1:2.95; Da (max):792 mm; Nr. of Holes:8; |
| 71821ACD/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | d:55 mm; Bore Type:Cylindrical Bore; da (min):64 mm; Enclosure:Double Shield; Fillet Radius/Chamfer:1.5 mm; Da (max):91 mm; Configuration:Single Row; Weight:0.607 kg; Static Load Rating:29,300 N; ra (max):1.5 mm; Limiting Speed - Grease:6,400 rpm; B:21 mm; Factor fo:14.4; D:100 mm; Dynamic Load Rating:43,500 N; Radial Clearance:0.023 to 0.043 mm; |
| 71814CD/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle | Mass inner ring:0.068 kg; F:40 mm; B:20 mm; r, r1,2 min.:0.6 mm; d:32 mm; |
| 71907ACDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | J1:57.15 mm; P60°:128 kN; RG:3/8 NPT; H1:120.65 mm; H:230.981 mm; Taconite seal:TER 189; Housing:SAF 618; A2:231.775 mm; L:393.7 mm; ba:42.069 mm; Appropriate attachment bolt size G:0.75 in; h:50.8 mm; J min.:304.8 mm; Stabilizing ring:2 x SR-1618; Ca:73.787 mm; Cap bolt, SAE grade:8; Initial grease fill:481.95 g; Cap bolt:2 x 3/4-10 UNC; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; |
| 71902CD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | Mass angle ring:2.16 kg; B1:14 mm; r3,4 min.:3 mm; d:220 mm; d1 ≈:262 mm; B2:27 mm; |
| 71811ACD/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | N1:19.05 mm; Ca:37.008 mm; dc:71.438 mm; Cap bolt, SAE grade:8; A2:120.65 mm; da:75 mm; RG:1/4 NPT; P60°:104 kN; S:3.175 mm; Bearing limiting speed:6300 r/min; P90°:59.6 kN; P180°:40 kN; Labyrinth ring (db shaft position):LOR 79; P120°:36.9 kN; Appropriate attachment bolt size G:0.625 in; R2:21.431 mm; h:28.575 mm; Pa:25.8 kN; ba:32.544 mm; R1:46.038 mm; |
| 71906ACD/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | B:55 mm; d:55 mm; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; D:65 mm; Mass bushing:0.32 kg; Coefficient of friction µ min.:0.05; |