| 11.20.0971.000.11.1504 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):100; D:180 mm; m:3,96 kg / Weight; Cur:28000 N / Fatigue li; B:34 mm; Da max:168 mm; Size (mm):100x180x34; Bearing number:20220-MB; ra max:2,1 mm; Cr:224000 N / Dynamic l; rmin:2,1 mm; nG:4000 1/min / Limitin; d:100 mm; Width (mm):34; da min:112 mm; C0r:290000 N / Static lo; D1:160,8 mm; Outer Diameter (mm):180; |
| 61.25.1155.575.11.1403 Standard 5 Slewing Ring Bearings | d:35 mm; Weight:1.44 Kg; r1 min.:0.6 mm; a:14 mm; T:59 mm; Basic static load rating (C0):155 kN; D2:58 mm; ra1 max.:0.6 mm; r min.:1.1 mm; D1:37 mm; Width (mm):59; Bore Diameter (mm):35; d2:25 mm; d3:80 mm; D3:85 mm; Bearing number:52407; T1:36.5 mm; Basic dynamic load rating (C):87 kN; D:80 mm; Da max.:53 mm; |
| 230.20.0400.503 Type 21/520. Standard 5 Slewing Ring Bearings | Da min.:66.2 mm; rb max.:1 mm; M:3 mm; Basic static load rating C0:780 kN; Basic dynamic load rating C:236 kN; α:4 °; r2 min.:1 mm; da max.:57 mm; Mass plain bearing:0.6 kg; da min.:54.8 mm; C:28 mm; d1 ≈:57 mm; Da max.:70.5 mm; r1 min.:0.6 mm; Material constant KM:330; D:75 mm; b1:4.6 mm; ra max.:0.6 mm; Design (sliding contact surface combination):Steel/steel; Specific dynamic load factor K:150 N/mm²; |
| 162.25.1120.891.21.1503 Standard 5 Slewing Ring Bearings | C:8 mm; B1:10,31 mm; Width (mm):9,8; Weight:0,022 Kg; B:9,8 mm; K:19,0 mm; E:9,6 mm; Bearing number:38KVLD; Size (mm):8x24x9.8; Basic dynamic load rating (C):3,65 kN; d:8 mm; Bore Diameter (mm):8; D:24 mm; Outer Diameter (mm):24; |
| 60.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):360; (Grease) Lubrication Speed:1100 r/min; D:540 mm; Basic dynamic load rating (C):1070 kN; Weight:67.7 Kg; Outer Diameter (mm):495; B:82 mm; Fw:405 mm; Basic static load rating (C0):1750 kN; d:360 mm; r1 min.:5 mm; r min.:5 mm; Ew:495 mm; Bearing number:NP 1072; |
| 232.21.1075.013 Type 21/1200.2 Standard 5 Slewing Ring Bearings | d1:127 mm; r1 min.:1 mm; d:100 mm; Size (mm):100x198x51; Angle:4 °; D:198 mm; D1:210 mm; r2 min.:0,3 mm; H:59 mm; B:51 mm; s:45 mm; C:46 mm; Outer Diameter (mm):198; Bearing number:GX 100 SP; dk:222 mm; Width (mm):51; Weight:10,9 Kg; Basic dynamic load rating (C):1940 kN; Bore Diameter (mm):100; |
| 61.20.0400.100.11.1503 Standard 5 Slewing Ring Bearings | Basic dynamic load rating (C):694 kN; C0r:954; Ew:-; D:340 mm; Bearing number:NU238R; (Refer.)Mass(kg):23.3; r1(min):4; B2:-; dd(min):-; r1 min.:4 mm; Bore Diameter (mm):190; Grease lub.:1700; db(min):206; r min.:4 mm; rb(max):3; ra(max):3; Bearing No.:NU238R; Basic static load rating (C0):954 kN; db(max):227; r(min):4; |
| 61.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | H1:23,35 mm; W:4 mm; L:10 mm; Dynamic load rating radial (C):42,5 kN; hi:5,6 mm; Fe:138 mm; Weight:2,4 Kg; Outer Diameter (mm):146; Hi:10 mm; he:4,6 mm; Bore Diameter (mm):80; D1:130 mm; H2:35 mm; Width (mm):35; Static load rating axial (C0):255 kN; Bearing number:YRT 80; Dynamic load rating axial (C):56 kN; De:146 mm; H:35 mm; He:12 mm; |
| 62.20.0400.000.11.1503 Standard 5 Slewing Ring Bearings | Bearing Insert Material:Steel; UPC:782475412242; Flinger Type:None; Bearing Duty:Intermediate Duty; Ship Weight:4.5 LB; d:1.5000 in; Bearing Series:208 Series; Bearing Locking Device:Setscrew; Grease Type:Unirex N2; Seal Type:Single Lip; Manufacturing Plant Location:Rogersville, TN; Retainer Type:Std Retainer; Expansion Type:Non-Expansion; Flinger Material:None; Max Bearing Speed:5000 rpm; Self Aligning:Self Centering; |
| 161.25.0980.890.11.1503 Standard 5 Slewing Ring Bearings | D:83,058 mm; Bearing number:25580/25521; Width (mm):23,812; Bore Diameter (mm):44,45; d:44,45 mm; Outer Diameter (mm):83,058; Size (mm):44.45x83.058x23.812; |