| 280.30.1100.013 Type 110/1300. Standard 5 Slewing Ring Bearings | Outer Dia (D):215.0000; Width (B):47.0000; Max. Shaft Shoulder Dia. Inner (Li):133.0; Width (mm):47; Radius (min) (rs):3.000; Max Speed (Oil) (X1000 RPM):3; Min. Housing Shoulder Dia., Outer (Lo):202.0; Bore Diameter (mm):100; Size (mm):100x215x47; Bearing number:6320; Standard Clearance:C0; Bearing Type:Open; Bore Dia (d):100.0000; Outer Diameter (mm):215; Precision:A1; Dynamic Load Rating (Cr):173,000; |
| 62.20.0630.001.21.1503 Standard 5 Slewing Ring Bearings | Bearing Outside Diameter, Nominal(Do):32.000; Bearing number:ASTT90 2820; Bearing Bore after Mounting (di) - 28 +0.052 / -0:28 +0.052 / 0; Bearing Length, Nominal (B):20.000; Material:Wrapped bronze with; Bore Diameter (mm):28; Wall Thickness (S3):2.000; Shaft Dia., Nominal (d):28.0000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Angle (B deg.):35; ID Chamfer Length (Ci):0.500; |
| 60.25.1055.575.11.1403 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):40,000; Size (mm):40x90x23; d:40,000 mm; B:23,000 mm; Width (mm):23,000; Bearing number:21308V; D:90,000 mm; Outer Diameter (mm):90,000; C:23,000 mm; |
| 60.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | H1:125.425 mm; N1:22.225 mm; J min.:320.675 mm; P60°:149 kN; H2:50.8 mm; J max.:368.3 mm; Stabilizing ring:SR-22-19; Da:200 mm; Housing:SAF 222; ba:50.006 mm; P150°:50.7 kN; PG:1/4 NPT; Cap bolt, SAE grade:5; Ca:62.789 mm; L:419.1 mm; H:239.316 mm; A1:120.65 mm; Cap bolt:2 x 3/4-10 UNC; da:110 mm; P180°:60.9 kN; |
| 162.25.1120.890.11.1503 Standard 5 Slewing Ring Bearings | Size (mm):95x170x34.5; d:95 mm; Bore Diameter (mm):95; Outer Diameter (mm):170; T:34,5 mm; Bearing number:30219; Width (mm):34,5; D:170 mm; |
| 60.25.1055.500.11.1503 Standard 5 Slewing Ring Bearings | Bearing number:6803ZZ; Basic dynamic load rating (C):2,6 kN; D:26 mm; da max:19 mm; C:5 mm; B:5 mm; Width (mm):5; Outer Diameter (mm):26; ra max.:0,3 mm; Weight:0,008 Kg; Basic static load rating (C0):1,55 kN; r min.:0,3 mm; Size (mm):17x26x5; Bore Diameter (mm):17; d:17 mm; (Grease) Lubrication Speed:26000 r/min; Da max.:24 mm; da min.:19 mm; |
| 62.25.0886.800.11.1504 Standard 5 Slewing Ring Bearings | Bearing number:6214-N; b:3,1 mm; Basic static load rating (C0):45,1 kN; r1 min.:1,5 mm; D2:134,7 mm; Weight:1,08 Kg; C:24 mm; a:4,06 mm; f:2,82 mm; d:70 mm; Outer Diameter (mm):125; Bore Diameter (mm):70; Basic dynamic load rating (C):61 kN; Size (mm):70x125x24; r2 min.:1,5 mm; D1:120,22 mm; D:125 mm; Width (mm):24; B:24 mm; |
| 231.20.0700.503 Type 21/850.1 Standard 5 Slewing Ring Bearings | B_:2.5; DI_:3.912; Weight:0,00054 Kg; D_:8; Cr:57; LangID:1; B0:2.5; hidYobi:MR83; fo:11.83; Da max.:6,8 mm; Bearing number:MR83; Prod_Type3:ESM_MD_OT; da min.:4,2 mm; mass:0.54; Width (mm):2,5; r min.:0,15 mm; B:2,5 mm; DE_:7.088; SRE:0.89; D_a:6.8; |
| 62.30.1250.000.11.1504 Standard 5 Slewing Ring Bearings | J min.:295.275 mm; Cap bolt:5/8-11 UNC; PG:1/4 NPT; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:141 kN; R1:65.088 mm; P120°:52.5 kN; Labyrinth ring:2 x LOR 112; P180°:57.4 kN; Appropriate attachment bolt size G:0.875 in; Mass pillow block:39 kg; H:222.25 mm; Pa:16.7 kN; N1:26.988 mm; J1:60.325 mm; Stabilizing ring:2 x 38151-24; A2:155.575 mm; H2:44.45 mm; Cap bolt, SAE grade:8; Initial grease fill:181.44 g; |
| 231.20.0800.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | Bearing number:234415-M-SP; m:1,22 kg / Weight; d:75 mm; ds:3,2 mm; ra1 max:0,3 mm; Width (mm):48; D:115 mm; Bore Diameter (mm):75; ra max:1 mm; C:24 mm; da:91,5 mm / Tolerance:; C0a:144000 N / Static lo; Outer Diameter (mm):115; α:60 ° / Angle; r1 min:0,3 mm; Size (mm):75x115x48; Ca:47500 N / Dynamic lo; B1:12 mm; d1:102 mm; B:48 mm; |