| No. | Brand | d | M | R | m | f | X | b | I |
| RKS.160.16.1424 | SKF | 600 mm | - | - | - | - | - | - | - |
| RKS.220641 | SKF | 115,087 mm | - | - | - | - | - | - | - |
| 16290001 | Kaydon | 53,975 mm | - | - | - | - | - | - | - |
| RKS.062.30.1904 | SKF | 22,606 mm | - | - | - | - | - | - | - |
| RKS.162.14.0414 | SKF | 35 mm | - | - | - | - | - | - | - |
| 16384001 | Kaydon | 1646 mm | - | - | - | - | - | - | - |
| RKS.060.25.1644 | SKF | - | - | - | - | - | - | - | - |
| VA250309-N | INA | 190 mm | - | - | - | - | - | - | - |
| XSU140414 | INA | 243,683 mm | - | - | - | - | - | - | - |
| 16326001 | Kaydon | - | - | 1,5 mm | - | - | - | - | - |
| 16317001 | Kaydon | 3,175 mm | - | - | - | - | - | - | - |
| VA140188-V | INA | - | - | - | - | - | - | - | - |
| 16281001 | Kaydon | 110 mm | - | - | - | - | - | - | - |
| VU25038 | INA | - | - | - | - | - | - | - | - |
| XSA140744-N | INA | 150 mm | - | - | - | - | - | - | - |
| RKS.160.16.1204 | SKF | - | - | - | - | - | - | - | - |
| VSA250955-N | INA | - | - | - | - | - | - | - | - |
| L4-13P9Z | Rotek | - | - | - | - | - | - | - | - |
| VSU251055 | INA | 31,987 mm | - | - | - | - | - | - | - |
| RKS.162.16.1644 | SKF | - | - | - | - | - | - | - | - |
| RKS.160.20.1904 | SKF | 50 mm | - | - | - | - | - | - | - |
| 16327001 | Kaydon | 8 mm | - | - | - | - | - | - | - |
| VSU200844 | INA | - | - | - | - | - | - | - | - |
| VLU200644 | INA | 90 mm | - | - | - | - | - | - | - |
| RKS.062.20.0944 | SKF | - | - | - | - | - | - | - | - |
| RKS.900155101001 SKF Slewing Ring Bearings | Size (mm):30x47x9; Bearing number:61906-2RS; Basic static load rating (C0):4,55 kN; Basic dynamic load rating (C):7,28 kN; Width (mm):9; D:47 mm; d:30 mm; B:9 mm; Outer Diameter (mm):47; Weight:0,051 Kg; Bore Diameter (mm):30; C:9 mm; |
| RKS.161.14.0544 SKF Slewing Ring Bearings | Bore Diameter (mm):30; Angle (α):25 °; B1:32 mm; D:62 mm; Bearing number:7206 ADB; Size (mm):30x62x32; d:30 mm; a:43 mm; Width (mm):32; Outer Diameter (mm):62; |
| RKS.220941 SKF Slewing Ring Bearings | Ew:277 mm; Size (mm):150x320x128; d:150 mm; B:128 mm; Basic dynamic load rating (C):1180 kN; Bore Diameter (mm):150; Basic static load rating (C0):1700 kN; (Grease) Lubrication Speed:1600 r/min; Bearing number:NP3330; C:128 mm; Outer Diameter (mm):320; Width (mm):128; Weight:57,8 Kg; D:320 mm; |
| XU120179 INA Slewing Ring Bearings | Basic static load rating (C0):25,9 kN; C:20 mm; Basic dynamic load rating (C):17,6 kN; Bore Diameter (mm):21; Size (mm):21x29x20; D:29 mm; Fw:21 mm; Weight:0,0315 Kg; Width (mm):20; Bearing number:TA 2120 Z; Outer Diameter (mm):29; |
| VA160302-N INA Slewing Ring Bearings | Bore Diameter (mm):17; Width (mm):12; D:40 mm; d:17 mm; Outer Diameter (mm):40; C:12 mm; B:12 mm; Bearing number:QJ 203; Size (mm):17x40x12; |
| A6-11E4 Rotek Slewing Ring Bearings | Bearing number:S16001; Width (mm):8; Bore Diameter (mm):12; D:30 mm; Size (mm):12x30x8; Outer Diameter (mm):30; B:8 mm; C:8 mm; d:12 mm; |
| RKS.062.20.1094 SKF Slewing Ring Bearings | d:7 mm; C:5 mm; Outer Diameter (mm):17; D:17 mm; Size (mm):7x17x5; B:5 mm; Width (mm):5; Bore Diameter (mm):7; Bearing number:619/7; |
| RKS.220841 SKF Slewing Ring Bearings | ID Chamfer Length (Ci):1.200; Housing Bore Dia. (Dh) - 20 +0.021 / -0:20 +0.021 / 0; Flange Dia. (Dfl pm 0.5):27.000; Material:Cast bronze with sol; Bearing Type:flanged; Bearing Length, Nominal (B):15.000; ID Chamfer Angle (B deg.):15; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Outside Diameter Tolerance (Do tol.):20 +0.021 / +0.008; Bore Diameter (mm):14; OD Chamfer Length (Co):2.000; |
| RKS. 512080101001 SKF Slewing Ring Bearings | db min:168 mm; Db min.:254 mm; (Oil) Lubrication Speed:1 700 r/min; Characteristic cage frequency, FTF:0.43 Hz; Calculation factor (Y0):0,76; rs min:4 mm; Basic dynamic load rating (C):700 kN; Basic static load rating (C0):1 070 kN; Outer Diameter (mm):270; Category:Bearings; r min.:4 mm; Y2:1.38; Cb min:17 mm; (Grease) Lubrication Speed:1 300 r/min; Bore Diameter (mm):150; Fatigue limit load, Cu:105 kN; |
| XSU080318 INA Slewing Ring Bearings | Bearing number:80176/80222; Calculation factor (Y0):1; C:31,75 mm; Basic dynamic load rating (C):610 kN; d:447,675 mm; da:475 mm; db:464 mm; Da:536 mm; T:44,45 mm; Basic static load rating (C0):1480 kN; Bore Diameter (mm):447,675; Size (mm):447.675x565.15x44.45; a:71 mm; Width (mm):44,45; r:3,3 mm; Calculation factor (e):0,32; Outer Diameter (mm):565,15; D:565,15 mm; Db:545 mm; R:3,3 mm; |
RKS.160.20.1904 SKF Slewing Ring Bearings Video
- The Latest in Slewing Ring Bearing Technology - Igus
Sliding slewing ring bearings operate at a maximum of 200 rotations per minute (RPM), while a rolling system can deliver up to 500 RPMs. Clearly this is a large ...
Slewing bearings - Liebherr
Liebherr manufactures top-quality large diameter slewing bearings. Depending on requirements, various dimensions and designs are available.
Slewing ring bearings, turntable bearings | Kaydon Bearings
Kaydon's slewing bearings offer a wide variety of solutions for the most demanding specifications in a variety of applications, including:.
Large-Diameter Anti-Friction Slewing Rings - Rotek Inc.
We pioneered big slewing ring technology for applications in power cranes and excavators, military equipment, machine tools, medical equipment, large antennas, ...82 pages
Slewing Ring Bearings
Slewing ring bearings are often relied upon to support loads in very large, heavy-duty equipment. Their exceptional combination of heavy load support and ...
Large Diameter Bearings Three Row Roller Crane Use ...
Large Diameter Bearings Three Row Roller Crane Use Slewing Ring Bearing ... Our product range consists of single row and double row ball or roller bearings that ...
Slewing Rings | SlewPro
Slewing ring bearings are designed for large load-bearing capability and can manage a full range of heavy-duty mechanical equipment. These devices have the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Large-diameter slewing ring - DirectIndustry
The slewing ring has to be adopted when, in a machinery or in mechanical plant, a structural part must rotate opposed to another part, along a fixed axis, ...