| No. | Brand | a | e | b | V | R | X | S | T |
| HS6-25E1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16376001 | Kaydon | - | - | - | - | - | - | - | - |
| 10-25 0955/0-0302 | IMO | - | - | - | - | - | - | - | - |
| 16307001 | Kaydon | - | - | - | - | - | - | - | - |
| MTO-73 | Kaydon | - | - | - | - | - | - | - | - |
| HS6-43P1Z | Kaydon | - | - | - | - | - | - | - | - |
| RK6-37E1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16368001 | Kaydon | - | - | - | - | - | - | - | - |
| MTO-145T | Kaydon | - | - | 25 mm | - | - | - | - | - |
| 12440001 | Kaydon | - | - | - | - | - | - | - | - |
| 91-20 0941/1-37162 | IMO | - | - | - | - | - | - | - | - |
| HT10-42N1Z | Kaydon | - | - | - | - | - | - | - | - |
| MTO-210XT | Kaydon | - | - | - | - | - | - | - | - |
| MTO-324T | Kaydon | - | - | - | - | - | - | - | - |
| MTO-265X | Kaydon | - | - | - | - | - | - | - | - |
| HT10-30E1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16298001 | Kaydon | - | - | - | - | - | - | - | - |
| HS6-29P1Z | Kaydon | - | - | - | - | - | - | - | - |
| 11-20 0641/1-32132 | IMO | 7.00 mm | - | - | - | - | - | - | - |
| RK6-29E1Z | Kaydon | - | - | - | - | - | - | - | - |
| 11-25 0955/1-0312 | IMO | - | - | - | - | - | - | - | - |
| 90-20 0741/0-37042 | IMO | - | - | - | - | - | - | - | - |
| RK6-29N1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16344001 Kaydon Slewing Ring Bearings | Ce - Dynamic Radial Rating1:7550 N; da - Inner Ring Backing Diameter:16.4 mm; Cage Type:CR - Phenolic Inner; R - Inner Ring To Clear Radius2:0.6 mm; d:12 mm; Limiting Speed (Oil):125200 rpm; do - Ball Diameter:5.953100 mm; Da - Outer Ring Backing Diameter:28.100 mm; Bearing Weight:0.035 Kg; Limiting Speed (Grease):62600 rpm; Bearing Width:10 mm; Design Units:METRIC; r - Outer Ring To Clear Radius3:0.6 mm; |
| MTO-870T Kaydon Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:4.15 in; Aa - Cage-Cone Backface Clearance:0.16 in; G1 - Heat Generation Factor (Roller-Raceway)11:36.8; Cg - Geometry Factor12:0.109; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:49400 lbf; r - Cup Frontface To Clear Radius2:0.06 in; T - Bearing Width across Cones:2.5624 in; Ab - Cage-Cone Frontface Clearance:0.16 in; K - Factor7:0.66; R - Cone Backface To Clear Radius1:0.14 in; |
| 12-25 0855/1-0321 IMO Slewing Ring Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)7:24100 lbf; K - Factor8:1.17; a - Effective Center Location4:1.39 in; R - Cone Backface To Clear Radius3:0.500 in; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:14.45 in; Ab - Cage-Cone Frontface Clearance:0.05 in; d:13.0000 in; da - Cone Frontface Backing Diameter:13.58 in; G2 - Heat Generation Factor (Rib-Roller End):479.1; Series:L860000; |
| MTE-47 Kaydon Slewing Ring Bearings | Shaft Size:2.75 in; Note:This product line wa; Seal Type1:Viton Single Lip; Bearing - Housing - Seal:LSE212BXHGRSS; Bearing Type:Split Cylindrical Ex; Dimension Y:2.0 in; Cor - Static Load Rating:36194 lbf; Cr - Dynamic Load Rating:31024 lbf; Dimension X (Thread):1 - 8 UNC; Bearing UPC:013992026026; Series Type:Light Series; Dimension L:5.1 in; Dimension C:2.559 in; Dimension G:6.2 in; Dimension H:3.6 in; |
| KH-225P Kaydon Slewing Ring Bearings | Shaft Size:9.5 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:4 x M42; Dimension K:12.0 in; Bearing UPC:013992023506; Seal Type:Viton Single Lip; Maximum Speed:700 rpm; Dimension J:26.4 in; Bearing Number:HSE908BR; Dimension H:15.512 in; Note:This product line wa; Bearing Type:Split Cylindrical Re; Cor - Static Load Rating:626992 lbf; Shipping Weight:2341 lb; Dimension M:16.0 in; Dimension L:36.0 in; |
| 92-20 0311/1-37202 IMO Slewing Ring Bearings | D:6.5313 in; Series:LL225700; Y - ISO Factor3:1.8; Da - Cup Frontface Backing Diameter:6.34 in; Db - Cup Backface Backing Diameter:6.22 in; C - Cup Width:0.5313 in; Cg - Geometry Factor:0.117; r - Cup Backface To Clear Radius1:0.06 in; Cup Part Number:KLL225710; e - ISO Factor2:0.33; Design Units:Imperial; |
| 16270001 Kaydon Slewing Ring Bearings | J2:252 mm; Bearing:21311K; J1:40 mm; UPC Code:999999999; Adapter Sleeve1:H311; C0 Static Load Rating:176; Lockwasher:MB11; Locating Rings (width x OD):SR120X11; H1:80.0 mm; N1:20.00 mm; A2:122 mm; Shaft Diameter d:50 mm; Seal Type:Labyrinth; Max Grease Speed:4500; L:275.00 mm; H2:30 mm; A:110.00 mm; Bolt Qty:4; Housing Mass:6.6 Kg; J:230 mm; |
| 11-25 0755/1-0414 IMO Slewing Ring Bearings | da - Cone Frontface Backing Diameter:39.88 mm; R - Cone Backface To Clear Radius1:2.290 mm; d:34.925 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2430 lbf; C - Cup Width:13.970 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3760 lbf; Y - ISO Factor9:1.59; C0 - Static Radial Rating:14200 lbf; Db - Cup Backface Backing Diameter:58.93 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):18; |
| HS6-37E1Z Kaydon Slewing Ring Bearings | e - ISO Factor3:0.35; D:2.2500 in; D1 - Flange Outer Diameter:2.4022 in; C1 - Cup Flange Width:0.1563 in; C - Cup Width:0.5313 in; Da - Cup Frontface Backing Diameter:2.40 in; Series:15500; Design Units:Imperial; Cg - Geometry Factor5:0.0577; r - Cup Backface To Clear Radius1:0.06 in; K - Factor2:1.69; Y - ISO Factor4:1.73; Cup Part Number:15520-B; |
| 11-25 0555/1-0412 IMO Slewing Ring Bearings | Bearing Outer Ring Material:Steel; Manufacturing Plant Location:Crossville, TN - DC; Grease Type:Unirex N2; Self Aligning:Yes; Ship Weight:14.61 LB; Bearing Insert Material:Steel; Seal Type:Single Lip; Ball Material:Steel; Bearing Family:Grip Tight Ball Bear; Bearing Bore Shape:Round; Ring Size:Standard; Flinger Type:Rubberized; Flinger Material:Steel; Housing Type:2 Bolt Pillow Block; d:2.2500 in; |
HS6-29P1Z Kaydon Slewing Ring Bearings Video
Slewing Rings - National Precision Bearing
NPB offers slewing rings in inch and metric sizes, as well as custom mounting configurations and lubricants. We have drive motor & pinion packages, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
iglide® PRT rotary joint & slewing ring bearing from igus®
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Their built-in mounting holes on the inner and outer rings allow for simple installation. Slewing rings are large-sized bearings that ...
Slewing Rings - Grainger Industrial Supply
Slewing rings may be small, but they help do some of the largest jobs in the business. From swing arm rotation on cranes to the platform on a wind turbine, ...
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...