| No. | Brand | a | e | b | V | R | X | S | T |
| 12-20 1091/1-32272 | IMO | - | - | - | - | - | - | - | - |
| 16338001 | Kaydon | - | - | - | - | - | - | - | - |
| KH-325P | Kaydon | - | - | - | - | - | - | - | - |
| 16376001 | Kaydon | - | - | - | - | - | - | - | - |
| 16330001 | Kaydon | - | - | - | - | - | - | - | - |
| 10-25 0955/0-0302 | IMO | - | - | - | - | - | - | - | - |
| HT10-30P1Z | Kaydon | - | - | - | - | - | - | - | - |
| MTE-145 | Kaydon | - | - | - | - | - | - | - | - |
| 16289001 | Kaydon | - | - | - | - | - | - | - | - |
| 12-25 1455/1-0327 | IMO | - | - | - | - | - | - | - | - |
| MTE-59 | Kaydon | - | - | - | - | - | - | - | - |
| MTO-065 | Kaydon | - | - | - | - | - | - | - | - |
| 11-25 0955/1-0312 | IMO | - | - | - | - | - | - | - | - |
| 12-25 1055/1-0323 | IMO | - | - | - | - | - | - | - | - |
| 16310001 | Kaydon | - | - | - | - | - | - | - | - |
| 16283001 | Kaydon | - | - | - | - | - | - | - | - |
| 16294001 | Kaydon | - | - | - | - | - | - | - | - |
| KH-125E | Kaydon | - | 9.0 mm | 31 mm | - | - | - | - | - |
| HS6-33N1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16333001 | Kaydon | - | - | - | - | - | - | - | - |
| 12-25 1155/1-0324 | IMO | - | - | - | - | - | - | - | - |
| MTO-145X | Kaydon | - | - | - | - | - | - | - | - |
| MTO-324X Kaydon Slewing Ring Bearings | Cover Length C1:1.644 in; Type:Open; B:9.7 in; Number of Bolts:6; Cover Diameter A:10.35 in; |
| RK6-22N1Z Kaydon Slewing Ring Bearings | N:22 mm; Jmin:285 mm; Material :Cast Iron; H1:100.0 mm; H:194 mm; End Cover2:EC518-615; A1:100 mm; Seal:TA518/ 3-3/16; Adapter Sleeve1:HA318; C1 Dynamic Load Rating:355; H2:35.0 mm; Seal Type:Taconite; C0 Static Load Rating:388; Bearing:22218K; G:M20; Max Oil Speed:4000; Jmax:295 mm; Housing Mass:13.1 Kg; Housing:SNT 518-615; Shaft Diameter d:3 3/16 in; |
| 12-25 1055/1-0323 IMO Slewing Ring Bearings | Y - ISO Factor1:1.68; Y1 - ISO Factor5:1.89; D:1.8104 in; Series:05000; K - Factor3:1.64; Y2 - ISO Factor6:2.82; Design Units:Imperial; e - ISO Factor4:0.36; G1 - Heat Generation Factor (Roller-Raceway)7:5.8; Cg - Geometry Factor8:0.0448; G2 - Heat Generation Factor (Rib-Roller End):5.55; r - Cup Frontface To Clear Radius2:0.03 in; Da - Cup Frontface Backing Diameter:1.67 in; C - Double Cup Width:0.9926 in; |
| HS6-33P1Z Kaydon Slewing Ring Bearings | B:28 mm; Chamfer:1.5 mm; Da:188 mm; Static Load Rating:131.9 kN; Oil Holes:3 mm; Mounting Hole Size:9 mm; D:240 mm; Dynamic Load Rating:73.1 kN; d:115 mm; da:168 mm; Outer rings PCD:217 mm; Number of Mounting Holes:12; Mounting Hole Countersink Diameter:14 mm; Inner rings PCD:139 mm; |
| RK6-43P1Z Kaydon Slewing Ring Bearings | Housing Only2:SDAF064K-11 15/16; E Max.:33.5000 in; Bearing Number:23064K; D:3.5000 in; C:14.7500 in; H:23.4375 in; Full Timken Part Number:SDAF23064K11-15/16; B:38.2500 in; Bolt Holes:4; Triple Seal Reqd:ER 859; A:12.0000 in; F:9 in; E Min.:32.7500 in; Assembly Weight:1269.000 lb; Diameter S-1:11 15/16 in; Bolt Hole Length:2 in; Bolt Hole Width:1.625 in; Seal Type:Triple Ring Seal; Adapter Assembly Number1:SNP-3064 x 11-15/16; |
| 16275001 Kaydon Slewing Ring Bearings | Contact Angle:25 º; Da - Outer Ring Backing Diameter:62.200 mm; Bearing Width:15 mm; da - Inner Ring Backing Diameter:45.700 mm; Design Units:METRIC; do - Ball Diameter:7.937500 mm; Limiting Speed (Oil):47200 rpm; C0 - Static Radial Rating:8090 N; D:68.000 mm; d:40 mm; R - Inner Ring To Clear Radius2:1.0 mm; Precision Class:ISO P4S (ABEC 7/9); Cage Type:CR - Phenolic Outer; Ball Type:STEEL; Bearing Weight:0.181 Kg; |
| 11-16 0100/1-081 IMO Slewing Ring Bearings | Center of Bearing from End S:21.5 mm; Foot Height H1:19.1 mm; Housing Style:Two-Bolt Pillow Bloc; Dimension L1:63.8 mm; Inside Ring Width B:=Bearings1_Inside Ri; Seal Type:Tri-Ply Seal; Bolt Hole Spacing J:149.2 mm; Total Height H2:106.4 mm; Dynamic Load Rating:8160 lbf; Shaft Size d:1.772 in; Total Length L:191.3 mm; Bolt Hole Length N1:28.6 mm; Weight:7.055 lb; Bolt Hole Width N:14.3 mm; Series:Industrial; |
| HT10-36P1Z Kaydon Slewing Ring Bearings | Dimension J (Bolt Size):1.000 in; Full Timken Part Number:TAPA26K115SB; Grease Lubrication - T Seal:1000 rpm; Dimension S:4.760 in; Pre Install Clearance Max:0.0079 in; Dimension G:5.040 in; Y2 - Geometry Factor:3.90; Dimension H:2.04 in; Shaft Size :115 mm; C0 - Static Load:212000 lb; Dimension B:11.18 in; Shaft Tolerance:0.0040 in; Dimension L:5.35 in; Dimension M:2.83 in; UPC Code:0883450308274; |
| 16318001 Kaydon Slewing Ring Bearings | R - Cone Backface To Clear Radius1:1.270 mm; C0 - Static Radial Rating:6650 lbf; a - Effective Center Location3:-2.8 mm; Cup Part Number:07210X; B - Cone Width:14.260 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:1700 lbf; Design Units:Imperial; da - Cone Frontface Backing Diameter:26.92 mm; r - Cup Backface To Clear Radius2:1.52 mm; Bearing Weight:0.10 Kg; Cage Type:Stamped Steel; e - ISO Factor8:0.4; |
| 16301001 Kaydon Slewing Ring Bearings | Liner Bore Size:2.9375 in; Heater Indicator:No heaters; Vibration Sensor Indicator:No; Seal Type:Auxiliary Dust Seal; UPC:782475639663; Base to Center Hight Numeric:4.5625 in; Pillow Block:SHORT SER PL-WATER C; Housing Coating:Powder Coat; Ship Weight:95 LB; Liner Type:PLAIN WATER COOLED; Seal Size:2.9375 in; Housing Type:Short Series Plain; Oil Pump Indicator:NO; Bearing Insert Material:Steel; Housing Material:Cast Iron; |
MTE-59 Kaydon Slewing Ring Bearings Video
Slewing Rings - National Precision Bearing
NPB offers slewing rings in inch and metric sizes, as well as custom mounting configurations and lubricants. We have drive motor & pinion packages, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
iglide® PRT rotary joint & slewing ring bearing from igus®
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Their built-in mounting holes on the inner and outer rings allow for simple installation. Slewing rings are large-sized bearings that ...
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - Grainger Industrial Supply
Slewing rings may be small, but they help do some of the largest jobs in the business. From swing arm rotation on cranes to the platform on a wind turbine, ...