| No. | Brand | a | e | b | V | R | X | S | T |
| RK6-25N1Z | Kaydon | - | - | - | - | - | - | - | - |
| MTO-415T | Kaydon | - | - | - | - | - | - | - | - |
| 12288001 | Kaydon | - | - | - | - | - | - | - | - |
| MTO-210XT | Kaydon | - | - | - | - | - | - | - | - |
| 16370001 | Kaydon | - | - | - | - | - | - | - | - |
| HT10-30P1Z | Kaydon | - | - | - | - | - | - | - | - |
| 91-20 0413/1-37112 | IMO | - | - | - | - | - | - | - | - |
| HT10-36E1Z | Kaydon | - | - | - | - | - | - | - | - |
| MTO-470T | Kaydon | - | 4.2 mm | - | - | - | - | - | - |
| 16320001 | Kaydon | - | - | - | - | - | - | - | - |
| 16310001 | Kaydon | - | - | - | - | - | - | - | - |
| 16353001 | Kaydon | - | - | - | - | - | - | - | - |
| RK6-22P1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16264001 | Kaydon | - | - | - | - | - | - | - | - |
| RK6-16P1Z | Kaydon | - | - | - | - | - | - | - | - |
| HS6-37P1Z | Kaydon | - | - | - | - | - | - | - | - |
| MTO-265 | Kaydon | - | - | - | - | - | - | - | - |
| 16324001 | Kaydon | - | - | 32 mm | - | - | - | - | - |
| RK6-29P1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16331001 | Kaydon | - | - | - | - | - | - | - | - |
| MTO-59 | Kaydon | - | - | - | - | - | - | - | - |
| 10-20 0311/0-32002 | IMO | - | - | - | - | - | - | - | - |
| HS6-25P1Z | Kaydon | - | - | - | - | - | - | - | - |
| 16258001 | Kaydon | - | - | - | - | - | - | - | - |
| MTE-87 | Kaydon | - | - | - | - | - | - | - | - |
| RK6-22N1Z | Kaydon | - | - | - | - | - | - | - | - |
| HS6-16E1Z | Kaydon | - | - | - | - | - | - | - | - |
| 12-25 1155/1-0324 | IMO | - | - | - | - | - | - | - | - |
| RK6-33E1Z Kaydon Slewing Ring Bearings | Seal Type:Triple Lip; Ball Bearing Housing Series:209 Series; Ship Weight:4.21 LB; Bearing Series:209 Series; Bearing Insert Material:Steel; Bearing Inner Ring Material:Steel; Bearing Bore Shape:Round; Bearing Family:Setscrew Ball Bearin; Housing Coating:Powder Coat; Self Aligning:Self Centering; End Cap Groove:Yes; Housing Material:Cast Iron; Grease Type:Mobilith SHC PM 220; d:45.0000 mm; Ring Size:Standard; |
| HS6-16P1Z Kaydon Slewing Ring Bearings | Cage Type:Stamped Steel; Design Units:Imperial; Series:09000; D:49.225 mm; G1 - Heat Generation Factor (Roller-Raceway):8; db - Cone Backface Backing Diameter:25.4 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1140 lbf; Da - Cup Frontface Backing Diameter:44.50 mm; Y - ISO Factor9:2.26; C - Cup Width:17.463 mm; Cup Part Number:09196; Aa - Cage-Cone Backface Clearance:1.8 mm; G2 - Heat Generation Factor (Rib-Roller End):4.05; |
| RK6-16P1Z Kaydon Slewing Ring Bearings | do - Ball Diameter:10.31880 mm; Bearing Weight:0.56 Kg; Limiting Speed (Grease):12200 rpm; R - Inner Ring To Clear Radius2:1.0 mm; Design Units:METRIC; d:85 mm; Contact Angle:25 º; da - Inner Ring Backing Diameter:92.800 mm; Ce - Dynamic Radial Rating1:24242 N; r - Outer Ring To Clear Radius3:1.0 mm; Limiting Speed (Oil):24400 rpm; C0 - Static Radial Rating:17836 N; D:120 mm; Ball Type:STEEL; Da - Outer Ring Backing Diameter:112.700 mm; |
| 16378001 Kaydon Slewing Ring Bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38900 lbf; d:170 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:383000 N; C0 - Static Radial Rating:710000 N; G1 - Heat Generation Factor (Roller-Raceway):523.5; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:74300 N; da - Cone Frontface Backing Diameter:180 mm; Design Units:METRIC; WPD:230.6 mm; Cage Type:Stamped Steel; |
| HS6-21E1Z Kaydon Slewing Ring Bearings | da - Inner Ring Backing Diameter:305.000 mm; C0 - Static Radial Rating:1390000 N; Tapered Bore:N; r - Outer Ring To Clear Radius5:2.500 mm; Cg - Geometry Factor3:0.1679; Design Units:METRIC; Reference Thermal Speed Rating (Oil)2:780; C - Inner Ring Width:50.875 mm; C - Dynamic Radial Rating1:750000 N; Bearing Weight:18.90 Kg; D:387.350 mm; R - Inner Ring To Clear Radius4:2.500 mm; Reference Thermal Speed Rating (Grease):670; |
| 12-20 0741/1-32242 IMO Slewing Ring Bearings | Bore d:440.000 mm; Outer-Ring Set:487RXS2245; Weight:965.300 lb; DUR/DOR F/E:487.000 mm; Lubrication Hole Diameter h:7.5 mm; Number of Lubrication Holes:8; Angle of Chamfer r1smin:20º; Width C:450.000 mm; Dynamic Load Rating C11:20200 kN; Backing Housing Diameter Ds:577.0 mm; Type:RX-1; Chamfer rsmin:4.00 mm; Inner-Ring Set:440ARXS2245; Lubrication Groove g:16.0 mm; Backing Shaft Diameter ds:477.4 mm; |
| RK6-29E1Z Kaydon Slewing Ring Bearings | Cg - Geometry Factor:0.108; a - Effective Center Location4:-0.16 in; da - Cone Frontface Backing Diameter:3.03 in; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):77.2; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:14600 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:32200 lbf; d:2.7559 in; db - Cone Backface Backing Diameter:3.15 in; C90 - Dynamic Radial Rating (90 million revolutions)5:8360 lbf; |
| 90-20 0311/0-37002 IMO Slewing Ring Bearings | Bearing Number:22222; Dimension H:1.77 in; Grease Lubrication - B/C/O Seal:600 rpm; Dimension S:4.13 in; Dimension L:4.86 in; Shaft Size Type:Metric; Shaft Tolerance:0.0040 in; Float:0.083 in; e - Geometry Factor:0.25; Pre Install Clearance Max:0.0067 in; Dimension E:2.75 in; Dimension M:2.48 in; Oil Lubrication - B/C/O Seal:600 rpm; Full Timken Part Number:TAPH22K100SB; Dimension D Min:11.88 in; Y2 - Geometry Factor:4.06; |
| HS6-29N1Z Kaydon Slewing Ring Bearings | Ring Size:Standard; UPC:782475987399; Bearing Outer Ring Material:Steel; Retainer Type:Max Life Cage; Shaft Attachment (2):Grip Tight; Bearing Duty:Normal Duty; Flinger Type:INTERNAL RUBBER LIP; Base to Center Height:Standard; Seal Type:Triple Lip; Anti-Rotation Pin:Yes; Max Bearing Speed:3840 rpm; Bearing Family:Grip Tight Ball Bear; Bearing Locking Device:Tapered Adapter Slee; Manufacturing Plant Location:Rogersville, TN; |
| KH-125E Kaydon Slewing Ring Bearings | Appropriate Hydraulic Nut:HMV80; Thread D12:Tr400x5; L1:170.00 mm; d1:360.00 mm; b:31 mm; t:15 mm; Weight:22.70 Kg; Appropriate Withdrawal Nut No.:HM3080; e:9.0 mm; Ro:G1/4; |
16307001 Kaydon Slewing Ring Bearings Video
Slewing Rings - National Precision Bearing
NPB offers slewing rings in inch and metric sizes, as well as custom mounting configurations and lubricants. We have drive motor & pinion packages, ...
iglide® PRT rotary joint & slewing ring bearing from igus®
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...
Slewing Rings - Grainger Industrial Supply
Slewing rings may be small, but they help do some of the largest jobs in the business. From swing arm rotation on cranes to the platform on a wind turbine, ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Their built-in mounting holes on the inner and outer rings allow for simple installation. Slewing rings are large-sized bearings that ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...